Cresting on Arrow Wraps

Jack Guard · April 18, 2007, 05:41:00 PM

Hey Guys, i am sorry if this has been touched on before but i am wondering if any of you have tried cresting over any of the plain arrow wraps javascript:void(0)and if so what cresting paint are ya using. i know i can have custom arrow wraps made but i was curious, if i wanted to add to any of the plain colors. Thanks, Jack

Adam Mooney · April 18, 2007, 07:01:00 PM

Use a plain white wrap and you can use any cresting laquers or model paint. They all work fine. You dont even have to clear over them.
Good Luck and if you need anything please let me know.

Shakes.602 · April 18, 2007, 07:30:00 PM

Sharpie Markers

stagetek · April 18, 2007, 10:43:00 PM

Jack, I've done it often with Bohning paints. Never had a problem.

stagetek · April 18, 2007, 10:43:00 PM

Jack, I've done it often with Bohning paints. Never had a problem.

OconeeDan · April 19, 2007, 07:46:00 AM

Testors paint used for models works fine. You can get a set of a half dozen popular colors in one box.

JRY309 · April 19, 2007, 08:57:00 AM

I have done it with Whispering Winds cresting paint and it worked fine.

traditional beagle · April 19, 2007, 06:29:00 PM

Go to Napa auto store and check out 3-M pin striping tape for cars. I use double silver, black and red. It is a little expensive but will last for hundreds of arrows. My buddies have never noticed it was tape and not paint. Very durable. All you need to apply is a pair of scissors. Also good straight lines and no mess.