Attention: ILF fans

[Kirkll]

There are a lot of ILF fans out there that would love to have a wood riser set up & and get away from the metal riser occasionally. 

I thought i would share a few photos of one that i recently built.  This one is Black Walnut with a G-10 Garolite frame. It has good mass weight and these risers do NOT flex.  I can custom build these to specs in other types of wood. I build 17" , 19"  &  21" lengths.   You can find more info on my website if this is something you would be interested in. I also build both hybrid long bow limbs, and the Sasquatch SS RC limbs... These are both static tip limbs.

At this time i have a relatively short wait time on my custom bows.....   Thanks for looking guys....   Kirk

https://photos.app.goo.gl/uVUBH7oZpALgmzbLA

http://bigfootbows.com/b/bows/

[Roy from Pa]

Nice Kirk..

[Buggs]

Damn Kirk, you put a lot of work into that design. Really nice looking

[Terry Green]

Nice!

[Kirkll]

Thank you gentlemen.....

these are custom built with options on how far to center,  or past center the shelf is cut. This particular bow was cut just past center and set up for shooting off the shelf. I have built others  cut 3/8" past center and a bit lower shelf for using an elevated rest and Berger button set up too.

There is another unique feature on the brass through bolts you see on this set up.
A quiver can be mounted to the belly side that is rock solid using 5/16 / 18 screws that can easily be removed when shooting 3D.

Here is my set up I used on a Turkey hunt in Texas. You can see the quiver mount on the belly side of the riser pretty good.     Kirk

https://photos.app.goo.gl/yruTRH5iASLsdRJz7

[hybridbow hunter]

Great work Kirk
ILF or classic bolt on those Sasquatch are incredible bows