Bandsaw circle jig

[Meleon]

Anybody have any pictures of a simple bandsaw circle jig they like to share? I want to add some spice to my riser.
The simpler the better.

[kennym]

Check this out and see if it helps...




https://www.kennysarchery.com/bow-build

[Appalachian Hillbilly]

Kenny, with that radius jig, do you still contour sand after sawing or is it clean enough?

[OldRawhide42]

I use a jig like Kennys . I cut a 2x4 with the same radius and use that as a sanding block.

[Mad Max]

Check this out and see if it helps...




https://www.kennysarchery.com/bow-build

Really nice setup Kenny
I like wax paper for my riser blocks

[Meleon]

Had a bit of a hiccup on the maple riser but the walnut one turned out good so far.
Pretty sure I can fix the maple one with patience.
I copied you swing jig Kenny.

[Shredd]

   Nice...  I like that type of accent...

[Meleon]

Thanks! It was nerve racking cutting into that walnut. That piece cost as much as a spruce 2x6