2020---->What did ya do today?

Started by Roy from Pa, January 02, 2020, 06:51:06 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 ... 38 39 40 41 42 ... 62
User actions

Mad Max

#780
September 13, 2020, 09:56:47 PM
 :thumbsup: :bigsmyl:
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Roy from Pa

#781
September 14, 2020, 05:56:30 AM
What's the pins for, it got a crack in it already?:)

Bvas

#782
September 14, 2020, 08:51:09 AM
Quote from: Roy from Pa on September 14, 2020, 05:56:30 AM
What's the pins for, it got a crack in it already?:)
Those are stabilizing bars to help control the power.  :bigsmyl:
Some hunt to survive; some survive to hunt

Roy from Pa

#783
September 14, 2020, 09:01:11 AM
Ah I see, so it adjusts from 15 to 25 pounds then?

:laughing:

Bvas

#784
September 14, 2020, 10:05:50 AM
Yea, but I could make you one lighter If ya need me to.  :tongue:
Some hunt to survive; some survive to hunt

Roy from Pa

#785
September 14, 2020, 12:30:30 PM
 :laughing:

Crooked Stic

#786
September 14, 2020, 09:18:14 PM
Bvas you prolly need some these pink accents to for that LIGHTER BOW.   :bigsmyl:
High on Archery.

Roy from Pa

#787
September 15, 2020, 06:30:56 AM
 :thumbsup: :laughing:

ztontonz

#788
September 21, 2020, 03:19:58 PM
Done with shaping the prototype td limbs forms. Still got the hardware to install and I can start glueing !

Mad Max

#789
September 21, 2020, 05:31:23 PM
What, are you make 2 different proto. limbs?
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

ztontonz

#790
September 21, 2020, 05:44:57 PM
One recurve, one hybrid design. All for the same riser

Mad Max

#791
September 21, 2020, 07:48:28 PM
Aha, that recurve look like it's going to be static :thumbsup:
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Bvas

#792
September 21, 2020, 08:50:13 PM
Thank goodness.
I thought that was upper and lower limb.  :biglaugh:
Some hunt to survive; some survive to hunt

Shredd

#793
September 21, 2020, 09:32:31 PM
Doing some colors...  Red...

Shredd

#794
September 21, 2020, 09:34:40 PM
And Wine...

Crooked Stic

#795
September 21, 2020, 09:52:25 PM
Shredd your finish looks good. But I got ask about the groove in the shelf what the purpose? And do you not think that weakens that area.
High on Archery.

Shredd

#796
September 21, 2020, 10:00:51 PM
I had not had a problem yet...   Most of my bows are under 50#...  The slot allows you to shoot vanes and it is a lot easier than sanding that corner...

Roy from Pa

#797
September 22, 2020, 08:06:44 AM
Very nice, Rich..

ztontonz

#798
September 22, 2020, 01:47:39 PM
Looking great Shredd. Do you have picture of the entire bows?

Buemaker

#799
September 22, 2020, 03:50:53 PM
Nice, I like that wine color.
Print
Go Up Pages 1 ... 38 39 40 41 42 ... 62
User actions
Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©