Split cane handle wrap

Started by Forwardhandle, December 27, 2019, 08:36:34 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Forwardhandle

I used to get split cane handle wrap from Pinehollow but I don't see it in there inventory any more any body have another source for it ?
If you fear failure, you will never try ! But never except it!!

Mad Max

I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Pat B

I've done a few cane handle wraps but I don't remember where I got the cane. It is used for chair caning so you could Google that.  I've used 1/4" wide stuff and it looks good but the 1/8" looks best to me. The trouble with using 1/8" is you need a 15' long piece or more to wrap a 4" handle. I never figured a good splicing method that was acceptable or comfortable.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Forwardhandle

#3
I like split cane handle wrap its my go to wrap for timber bows your right the 1/8 is easier to work with on any handle that has any countour to it ,I soak mine in water before using and use some leather dye for contrast makes a durable handle wrap !

[attachment=1,msg2901260]


If you fear failure, you will never try ! But never except it!!

Buemaker


Forwardhandle

Bue I do it like a string serving but you have to put a 90 deg bend on the end of the tail where you start sence the cane is stiffer then string and at the end of the wrap I pull it threw and put a dab of real thin CA glue I have never had any unwrap & give it a light sanding before the leather dye kida gives it the old school
look !!
If you fear failure, you will never try ! But never except it!!

Pat B

I do like Richie but remember to wrap the direction your fingers go around the handle or just grabbing the handle can loosen the wrap.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Forwardhandle

Also the 1/8" stuff wraps nice around a bulbous handle vs the 1/4 " you can also put little drops of thin CA between the wraps to hold in place I have had that bow with that wrap drug threw beat up dense woods for 3 seasons with out issue its a tuff material !

[attachment=1,msg2901379]

If you fear failure, you will never try ! But never except it!!

neuse

That's a good looking handle wrap.

Flem

Quote from: neuse on December 30, 2019, 06:32:01 AM
That's a good looking handle wrap.

I agree, looks cool/trad. So does the cane need to be sealed? Seems it would soak up moisture.

Forwardhandle

Flem I never sealed it other then Johnson floor wax , now that I discovered ceramic wax ,Im going to use it on the current wrap ,I never had a issue with it that bow has been in some ruff inviorments with no problems !
If you fear failure, you will never try ! But never except it!!

rainman

Try Franks cane and rush supply.  Woodcraft may have it also.
Semper Fidelis
Dan Raney

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©