Predator custom replacement bolts

[Neukdae]

Anyone ever heard of replacement takedown bolts for predators risers? The only way you can take a stock predator bow down is by using an allen wrench, im hoping i can find some replacement bolts that can be taken down by hand, either with antler overlays or something similar.

[KentuckyWolf]

Are the limb bolts 10/24 thread? Length?

[Yellow Dog]

Predators are a little special. They don't have a separate bezel, it's a one piece bezel bushing assembly. I believe anything that works on a Black Widow, with the bezels permanently installed in the limbs, would work with a Predator. 

I have some antler burr bolts for my Widows, I'll check to see if they work on my Predator. I'm almost certain they will.

[Yellow Dog]

Predator one piece bezel.

[attachment=1]

With a Black Widow antler burr bolt.

[attachment=2]

[attachment=3]

[Yellow Dog]

A standard antler burr bolt won't work. Flat on the bottom, designed to be installed with the bezel removed. Can't do that with a Predator. See the pic below.

Standard Black Widow brass knurled takedown bolts would also work, they're tapered to fit in the bezel. 

[attachment=1,msg2872818]

[Neukdae]

Makes me wonder if you couldnt just get/tool an overlay with the appropriate allen wrench sticking out the bottom and just epoxy it to the limb bolt head.

[Yellow Dog]

That would work.....you can buy these knurled knobs from Bingham. You'd have to epoxy some type of spacer/washer between the allen head and the knob, since the Allen head is not flush with the bezel. It's slightly recessed. Bingham knobs.

[attachment=1,msg2872822]

[attachment=2,msg2872822]

[kennym]

I have a few of the Bingham style knobs like Mike pictured there floating around since I don't sell them anymore.

Let me know if you go that route and for shipping they're yours...

[Neukdae]

I found these on 3 rivers:
https://www.3riversarchery.com/trophy-bur-limb-bolt-adapters.html
Might be the solution to my problem.

[Yellow Dog]

Yup......

[MCNSC]

Almost positive that the brass limb bolts that BW sells have the taper under the head. They have a knurled outer edge and a hole thru them.

[KentuckyWolf]

The brass thump bolts from BW are tapered on the underside and have an Allen wrench hole for when you need leverage.