2019 what did ya do today....

goobersan · May 05, 2019, 08:20:22 AM

Having trouble loading video. If this works today I'll post more
[attachment=1]

Roy from Pa · May 05, 2019, 08:35:08 AM

Check your PM, Josh..

Flem · May 05, 2019, 08:49:35 AM

Thats a lot of grease in there! Looks strange, contaminated?
Now you got me curious about your mod!

Roy from Pa · May 05, 2019, 09:20:29 AM

Looks like it has water in it...

Here is Josh video..

https://youtu.be/VEuIWnB3M_A

goobersan · May 05, 2019, 11:10:43 AM

No to both. Just a very weird "snotty" type grease. So as the motor shaft spins the 3 prongs ride up and down 3 different ramps. That grease has some magic to it since the plastic doesn't wear away. Looks like regular plastic.
My "fix" is a piece of aquatherm pipe that's nearly lab grade plastic. Hoping the grease doesn't break it down.

Thanks Roy. For some reason I can't load video. Daughter using laptop for school

If this works I'll get that last bit of oscillation out.

Roy from Pa · May 05, 2019, 11:11:43 AM

Josh is that the right video?

goobersan · May 05, 2019, 11:14:04 AM

If it isn't me riding a unicorn holding a pink bow it's definitely the right video

Roy from Pa · May 05, 2019, 11:14:44 AM

Youtube blocked that video of your pink skirt:)

Flem · May 05, 2019, 11:59:43 AM

Looks like your still getting some oscillation?

goobersan · May 05, 2019, 12:35:03 PM

Just a bit. Wasn't sure how it would work out. After the next couple bows I'll take it apart, check for wear, and make the piece of pipe an 1/8" longer.
So far it's doing fine. Got the fades sanded down. Not much of an issue with that little bit of oscillation

Crooked Stic · May 07, 2019, 07:37:50 PM

Ok been doing jigs today. They are a pain but better than fitting the riser every time. This on has a petite little 13 in.riser. .004 limb taper and lots of reflex.

Sent from my SM-J737V using Tapatalk

kennym · May 07, 2019, 07:41:43 PM

Quote from: Crooked Stic on May 07, 2019, 07:37:50 PM
Ok been doing logs today. They are a pain but better than fitting the riser every time. This on has a petite little 13 in.riser. .004 limb taper and lots of reflex.

Sent from my SM-J737V using Tapatalk

Doing logs? What's that?

Roy from Pa · May 07, 2019, 07:46:59 PM

Kenny, he prolly meant sawing logs, aka his afternooner nap..

Crooked Stic · May 07, 2019, 07:53:59 PM

Fat fingers JIGS

Sent from my SM-J737V using Tapatalk

kennym · May 07, 2019, 08:17:07 PM

LOL I meant what ya knew

Eric Krewson · May 08, 2019, 09:28:24 AM

I made Roy a gizmo out of fancy curly wood of some kind that he graciously donated to my St Jude Gizmo project. I used iron nitrate stain to bring out the curl like I do on a flintlock.

It still needs a few more coats of Tru-oil.

Roy from Pa · May 08, 2019, 09:47:50 AM

Thanks Eric, that's sharp.

Was that from the piece of wood that had the round cut on the end?

I don't know what kind of wood it was.

Pat B · May 08, 2019, 10:02:07 AM

Eric, there were a lot of Gizmo's around the bow shop at the Classic. They all got a lot of use.

Crooked Stic · May 08, 2019, 10:12:54 AM

That's a nice one. Be sure to send structions.so Elroy ain't scratin his hair out.

Sent from my SM-J737V using Tapatalk

JWheel · May 08, 2019, 12:27:00 PM

It's so cool and inspiring watching what all you guys are working on...I finally got this thing sprayed down...I think I'll stick with gloss on this one.

[attachment=1]
[attachment=2]
[attachment=3]
[attachment=4]