Main Menu

Riser question

Started by Bowbender63, September 10, 2018, 04:57:55 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Bowbender63

Need some help I pick up a pair of longbow limbs at Yard sale the limbs are marked 60# @28 so I cut out ariser of a pattern I had and used the limbs have a nice curve to them not sure of the limbs pad angle but the limbs are short so it's a 15" riser bow looks good strung but will only pull like 22" that's it is the angly off or does it need to be a forward grip or both thanks

Pat B

Do you know who made the limbs? Try to find out what the bow the limbs were made for looks like so you can get the full potential from the limbs. The 60#@28 will depend on the riser length and the limb pad angle.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

kennym

Got a pic? String and unstrung would help...
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Bowbender63

Went back to the yard sale guy he said his son got them off eBay so I looked and believe these are the the limbs and riser I won't to lay up my own riser have temp.for a few different risers but none like this any suggestions[attachment=2][attachment=1]

kennym

Art, honestly it doesn't look that different than my TD for angle. Best I can tell from the pic they have there.


Limbs look like plenty of reflex  but hard to tell.


Can you find a riser like that?  Think Black Hunter or Galaxy is the name of it. The whole bow is a bit over $100 so the riser might be fairly cheap.
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©