Warf candidates

[Hoosierarcher88]

Found a few risers for possible warf candidates. Out of these 3 which looks most suitable for a warf.

[attachment=1][attachment=2][attachment=3]

[Roy from Pa]

2 on left.

[M60gunner]

X2, any idea what brand they are?

[Hoosierarcher88]

Left is a jennings lightning
Middle is an outers blazer
Right is a bear whitetail 2

[Bvas]

Jennings lightning is the same as a black bear. Many consider it to be the best warf bow.
I have one myself that I killed my first deer with. One of these days it will get warfed as well.

[Hoosierarcher88]

well i have 1 riser on hand that may make a good candidate. Its a pse mach 9 riser. Limb pocket angle looks good. Limb bolt to limb bolt measurement is 16.5" so im not sure how that comes out for riser length. Just for giggles i sat some dryad epic limbs i have sitting around into the limb pockets. What do you guys think



[attachment=1][attachment=2][attachment=3][attachment=4][attachment=5]

[Jakeemt]

I'd measure out the limb pocket angles. Other than that I can't say much else lol as I've built a grand total of 1! Lol good luck!

[Hoosierarcher88]

I think what im going to do is order some sage limbs and test them out on a few of my different risers and see which ones they like. I can hold rockers in place with double sided tape so i can easily swap around and twist up a few strings.

[Hoosierarcher88]

Got some measurements on limb pocket angles tonight. The blue riser is 18°, camo riser to its right is 21-21.5° and camo riser with tape around grip is 23.5-24°