Main Menu

split bamboo backing

Started by leonleon, August 06, 2012, 03:34:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

leonleon

Hi all!
Got my beautiful bambo backed highly reflexed/deflexed longbow cracked today!
Sad story but idiotic of course.
Now I need to fix it. How! Strip is 1/3 inch wide and 3 inches long on upper back of limb.
Godo advice welcome.
Best regards Joel

Pat B

You could glue(hide glue, carpenters glue or super glue) the strip back down and add a wrap at the beginning of the splinter. Sinew would be the best wrap material but silk thread or other thin, strong thread will also work. After you wrap, soak the wrap with super glue or other glue and let it all cure for a few days. Your bow will probably be a little stiff in the area where it is wrapped.
 Pictures would help with the diagnosis.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

macbow

What many do is like Pat said and then add,a similar wrap in the same area on the other limb.
You can color them with a marker and make it look like it was ment to be that way.
United Bowhunters of Mo
Comptons
PBS
NRA
VET
"A man shares his Buffalo". Ed Pitchkites

Roy from Pa


leonleon

Thanks a lot for your advice. Is hide glue more flexible than super glue? Would it allow the limb to bend better? Where can I find hide glue? Pretty sure it will be hard to come around here in Sweden....
I will try to post a pic here in short.
For how long in general, do you let it rest before using the bow again-after gluing operation?

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©