Main Menu

Pin holes

Started by mzombek, August 05, 2012, 08:14:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

mzombek

August 05, 2012, 08:14:00 AM
I have a longbow that just got done final sanding. While inspecting, I found a pin hole on each side of 1 fadeout. The holes are about .020 deep and the same wide. Can I fill each super glue and forget about them?
Z

DVSHUNTER

#1
August 05, 2012, 10:11:00 AM
Mix up some sanding dust with the ca glue. It will fill better.
"There is a natural mystic flowing through the air; if you listen carefully now you will hear." Bob Marley

Pat B

#2
August 05, 2012, 11:10:00 AM
2x
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow
Print
Go Up Pages1
User actions
Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©