Another 3 piece recurve build, Dymondwood Coco riser with HRM cores w/ Zebra veneers

Started by Kevin Breaux, June 25, 2012, 02:16:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Kevin Breaux

June 25, 2012, 02:16:00 AM
This was started on 15 June and finished the 26th of June. There were 6 half days and the other 4 were 12 hour days,
  66" 3-piece T/D, Cocobolo and Zebrawood.

BenBow

#1
June 25, 2012, 09:49:00 AM
Hey Kevin it's good to see your still at it. Nice bow for sure.
galen
But his bow will remain steady, and his hands will be skillful; because of the hands of the Mighty One of Jacob, because of the Shepherd, the Rock of Israel,  (Genesis 49:24 [NETfree])

Sam Harper

#2
June 25, 2012, 01:44:00 PM
Very cool.  Thanks for showing us.
There are strange things done in the midnight sun by the men who moil for gold.

Johan van Niekerk

#3
June 25, 2012, 02:52:00 PM
LOVE the photos. I just learned a very good "trick". Use tape to stick them slippery gluey limbs down before trying to apply pressure.

Obvious now that I've seen it...wish it was as obvious all those times I made bows with limbs that ended up shifting under pressure

inksoup

#4
June 26, 2012, 04:57:00 AM
says this content is not available???
these are not the droids you are looking for.
Print
Go Up Pages1
User actions
Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©