T- Bird or Fullerplast ?

[Jim Rocole]

I am considering going to one of the better finishes for my bows. I have been using the spray spar for the first couple i have built but I am looking for something more durable. How easy is it to use? Pro's/Cons of each. Any other suggestions. Best way to apply?

[copicasso]

I was about to post the same.I will be watching for answers.

[critter69]

Iam pretty new to this bow building stuff, and have only used thunder bird. It seems like great stuff, I cant think of any other reason to try another finish.Goes on good ,its easy to get a texture to it if that is what you like.Its very durable.Great stuff. Go with the bird I say.

[Jim Rocole]

THanks for the info. I have 5 bows in the process. I am building two LB for my brother and nephew and will be skinning the limbs. Can this be sprayed over the skins after sealing them with Super glue?

[mater]

Ive used them both with good results. I think fullerplast is thicker for whatever thats worth.

 Mark

[Crooked Stic]

T-bird by all means. Also Krystal is a good choice.

[legends1]

I use Fullerplast,i get long lasting wonderful finishes with it.It is probably the most widely used by pro's and hobby.

[Bowjunkie]

I've sprayed a bunch of bows with Fullerplast, then I tried Thunderbird. I won't use Fullerplast again unless they quit making Thunderbird. It's more durable and I like the look a little better.

They're about the same as far as mixing, clean up, spraying, etc. Both are sandable as their own fillers. Both harden easily over oily woods. Fullerplast dries faster.

[Jim Rocole]

Decided to go with the T-bird. How amny bows can I expect to get out of the quart kit?

[GREG IN MALAD]

Jim,
I use one ounce of finish per coat and three coats per bow. Depending on how much you use for sealer and filler will determine how many bows you can finish, I would guess 10-15. I sprayed T-bird over snake skins once and had it peel off.