Phenolic riser what finsh

[jtwalsh62]

I have made 2 riser that are mostly phenolic what finsh works best on them

[Crooked Stic]

Whatever you have been using should work fine.

[L82HUNT]

Looked at a few places to get a big enough piece like that where did you get yours?

[jtwalsh62]

Rosewood Archery
http://www.rosewoodarchery.com/

[bjansen]

I use tru-oil for the first couple coats as it will soak into the linen fibers and it will give you that jet black finish.  Then I sand lightly, and spray with Thunderbird.  I noticed if I go straight to thunderbird without a few hand rubbed coats, it will not seep into the fibers but rather dry on top giving a whitish/uneven finish.  

Nice risers.

[Robertfishes]

wow, those are gonna look awesome!

[bamboo]

Originally posted by bjansen:  I noticed if I go straight to thunderbird without a few hand rubbed coats, it will not seep into the fibers but rather dry on top giving a whitish/uneven finish.  

i've used a sharpie to camo the linen threads before finishing too