2 piece take-down?

[northland archer]

My son and I just got back from MOJAM, and had a great time.  Ok, now i need a little help.  I picked up a very nice set of billets and while i wait for my take down sleeve, i am trying to come up with a rough layout for this bow.  I am shooting for a 62-64 bow at about 55 pounds @ 28. I will heat in a little flip to the tips. When doing a 2 piece, is the length of the take down sleeve counted as the 4" handle?  Also, will this layout for the most part the same as a one piece would?  ( 4" handle, 1 1/2" - 2" fades, 1 1/2" wide limbs to mid limb then to 3/8" tips) Any help or direction will be helpful. I looked through some of the build alongs but need to be sure before i get started.  Thanks for any help.

Treavor

[broketooth]

When you order a takedown bowsleeve, make sure it come with two brass innersleeves with the steel sleeve. There is an entire bow build of my two piece bow build.  http://tradgang.com/noncgi/ultimatebb.php?ubb=get_topic;f=125;t=003411#000000

[broketooth]

its the wrong thread location , im working on the correct thread location hold tight. i know what you want. pat brennen and stiks- andstrings also know what you want from me or shawn. there is an entire bow build of what you are trying to do. just trying to find the link. r.

[northland archer]

I appriciate any info you have.

Thanks much

[KellyG]

ruddy should be able to help he just finished one of these not long ago.

[broketooth]

http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=125;t=004211

[broketooth]

that is the correct link. i hope this helps. rv.

[fish n chicks]

Broketooth made one of the baddest bows i've ever seen or shot from that thread. I know cause I have it! I can't help you much to answer questions, but if you do what he did, you'll be very pleased.