SPRAY BOOTH BUILD-A-LONG

[Teagus]

Scored this spray booth on CR list. Had to modify it to fit my bow holding fixture. Stepson showed up Sunday and big progress was made. Got the light in and welded up the cradle to hold the fan and motor.

[Teagus]

Having problems with new Windows 7. This is a pain.

[Teagus]

This was originally on the top. Now heading out a window.

[Teagus]

This turbine purrs. I thought it would sound like a jet taking off.

[Roy from Pa]

Very nice.

[T Folts]

Nice set up, I LIKE IT.

[mtquivers]

I'm jealous!! how about a close up of those bow holders?

[Teagus]

The bow is held by 2 sliding clamps on a square aluminum tube. The clamps have living hinges (soft plastic) that flex. They work with ongbows or recurves. The base fixture rotates and has a 30 degree spring-loaded index on the right side. the left side holder for the square tube is spring-loaded so the square tube and the bow can be removed and set into a vertical drying fixture on the outside of the booth. My machinist is making up 5 more sets of clamps for a total of 6 bows at a time. This could be a long one boys. It is heading to Fuller-plast and jam gun insanity. Hi Marty!

[bjansen]

Very nice!

[tommy6]

Much nicer than my cardboard box!

[Robertfishes]

cool, very nice!

[ChristopherO]

And I was expecting to see a 2x4 frame with polypropolene stapled on it!  :eek: