Fullerplast

[Sharppoint]

were can i purchase fullerpast

[Apex Predator]

Van Dee decorating, Miami,
FL.  Only place I know of.

http://www.van-dee.com/

[bjansen]

Marty, I was always wondering what you actually order on that site.  Do you order both a gallon of the Fullerplast, plus the catalyst...and if you need the catalys,how much catalyst do you need for a gallon.

Also just wondering, as your finish on yours bows looks exellent,....do you use satin or gloss?

Thanks

[Jason Scott]

I know of another bowyer that has a textured finish similar to his. This guy uses gloss but on the last coat he sprays from a distance and lets the finish collect into larger droplets that start to slightly dry before landing on the surface. Turn the volume up and from a distance the droplets will not level all the way and will dry with a texture. You could experiment on something smooth until it gives the result. In theory, I guess it's like adjusting the gun as to not give a good even coating for the rougher texture. When it's spraying crappy that's just about right.

[manfromthepast]

Make sure to follow all health and safety precautions when using this stuff.  The nickname for Fullerplast is "death in a can".

[Apex Predator]

I use satin.  You can skim gloss off the top before mixing if you want.  When you call, let them know you are building bows.  You will order a gallon of finish, one bottle of catalyst, and some of the fast synol thinner.  I've tried other lacquer thinners but had problems with it.

[bjansen]

Sounds good.  Thanks for the info Marty.