Bingham ??

[Eastern fisher]

I have read in several spots about the Bingham Bow Plans. What are these and where can someone purchase them??

[tradsniper]

http://www.binghamprojects.com/

[Robertfishes]

this 58 inch recurve is one of four I have built using Binghams design, I did change the grip to a lower wrist and I made overlays smaller too.    

[Eastern fisher]

Thank you very much.  nice bow robertfishes

[Pennsyltuckey pete]

This is what the Takedown model looks like





.

pete

[Blue EagleBum]

Pennsyltuckey, in the first bow picture, what types of wood are used in the riser.
That is one of the best, if not the best looking riser / wood combination I have ever seen. I keep coming back to it just to look at it again.

[jsweka]

Here's another example of a Bingham Takedown.  You can see comparing mine to Pennsyltuckey's you have a lot of freedom to do what you want with a Bingham takedown riser.

[Pennsyltuckey pete]

Thank you for the compliment!

What would you say if I told you I don't Remember?????   :eek:    :eek:    

Call me a Liar!  That is what you should do any way!  I agree with you on the pretty factor.  The riser core is a piece of bubinga.  The sides of the riser is a highly figured piece of curley maple.  My intent was to represent a "log" of wood with a dark heartwood and light growth wood.  Came out way better than I expected.  Here are some other shots of the bow if you are interested.    





pete

[Blue EagleBum]

THANKS FOR THE INFO PENNSYLTUCKEY. AFTER i COMPLETE MY THREE LONGBOWS THAT ARE IN THE PROCESS, I WANT TO BUILD A TAKEDOWN RECURVE. BUT I DON'T THING I WANT TO GET INTO THE LIMB LAMINATIONS AT THIS POINT. SO I WOULD LIKE TO BUILD MY OWN RISER AND PURCHASE THE LIMBS FROM SOMEONE.