A quarter in the riser?

Started by Leo L., September 19, 2008, 11:58:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Leo L.

September 19, 2008, 11:58:00 PM
Hey all. I'm working on my first osage selfbow.  I was just wondering if anyone has experimented with using a quarter forstner bit and embedding a quarter somewhere in the riser?  And if so, do you have a pic you can share?  Any tips on doing this, or not doing this?

BenBow

#1
September 20, 2008, 10:24:00 AM
Leo I've been thinking of doing the same thing on some bows I'm going to be building for the grandkids. Am looking at embedding the quarter from the state they live in. Haven't gotten to it yet but I figured I would have to take my dremel and rough up the back side of the quarter then use smooth on epoxy to glue it into the hole created by a forstner bit. If you try it let us know how it turns out for you.
But his bow will remain steady, and his hands will be skillful; because of the hands of the Mighty One of Jacob, because of the Shepherd, the Rock of Israel,  (Genesis 49:24 [NETfree])

Tom Leemans

#2
September 24, 2008, 08:52:00 AM
Should work just fine. Make it a snug fit. The wood will swell a teeny bit when you glue it. It should hold just fine with epoxy.
Got wood? - Tom

NightHawk

#3
September 24, 2008, 02:13:00 PM
yes and yes

myspace.com/doylejmd
1) Gen. 21:20
And God was with the lad, he grew, and he dwelt in the wilderness, and he became an archer
2)The democracy will cease to exist when you take away from those who are willing to work and give to those who would not.
Thomas Jefferson

imua-06

#4
September 24, 2008, 02:21:00 PM
Just watch for the guide screw on the Forstner bit so it doesn't go too deep in your wood.  Depending on where you are placing it, it might be better to use a hole saw in a drill press since there is no guide screw, or just chisel it.
Honor is a gift a man gives himself that no one can take away.

JEFF B

#5
September 24, 2008, 02:49:00 PM
i used a dremel and just took it slow then i fitted the coin to see if it was just right after getting it just so i put two part epoxy in the hole then pressed the coin home. done just like that. i am sorry but i dont have any pics but the next time i do one i will show some pics.  :thumbsup:
'' sometimes i wake up Grumpy;
other times i let her sleep"

TGMM FAMILY OF THE BOW

Leo L.

#6
September 24, 2008, 07:24:00 PM
Thanks guys, all very helpful.  I also found this on another site.

http://www.xsorbit4.com/users/buildabow/index.cgi?board=buildalo  ng&action=display&num=1207229612&start=40

Leo L.

#7
September 26, 2008, 08:14:00 PM
I gave it a try on a scrap piece of wood.  Pretty happy with the results so far.


BenBow

#8
September 26, 2008, 10:29:00 PM
Leo you did good. Will do that with the next grandkid bows.
But his bow will remain steady, and his hands will be skillful; because of the hands of the Mighty One of Jacob, because of the Shepherd, the Rock of Israel,  (Genesis 49:24 [NETfree])

4runr

#9
September 26, 2008, 11:25:00 PM
Nice Ohio quarter Leo  :bigsmyl:    :thumbsup:
Kenny

Christ died to save me, this I read
and in my heart I find a need
of Him to be my Savior
         By Aaron Shuste

TGMM Family of the Bow

Leo L.

#10
September 27, 2008, 05:13:00 PM
It looks familiar to you ha Kenny?  Haha.  Thanks a million.  Be on the lookout in the near future for a new thread with pics of it in the bow.

NightHawk

#11
September 27, 2008, 05:39:00 PM
1) Gen. 21:20
And God was with the lad, he grew, and he dwelt in the wilderness, and he became an archer
2)The democracy will cease to exist when you take away from those who are willing to work and give to those who would not.
Thomas Jefferson

Leo L.

#12
September 27, 2008, 06:05:00 PM
That looks good Joe, that's what I'm trying to do.
Print
Go Up Pages1
User actions
Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©