Couple jigs/tools

[bjansen]

I made a couple tools this weekend.  First is a small wheel holder, made from 6061. I put the two pieces together with  1/2" OD - .260 ID aluminum pipe which is inset in a .200 deep tenon in each of the side pieces. Works really well.

 

 

Next is a scribing jig made from a 1 1/8" piece of aluminum round stock, a cut of 2" angle iron and a cam lock. I drilled the pen hole so it would hold a fine tip sharpy real snug and milled a slot so it can adjust up down as well.The bottoms are polished flat on the disc sander.  This is just what I needed.  

 

 

 

 

[Ray Hammond]

nice work!!! I like that scribe a LOT

[Lin Rhea]

First class work.    

[gudspelr]

Wow, those look great. That scribe would be SUPER handy. I use a marker to help keep my center line on my handle material as I remove material, but would be a lot less clumsy of an operation with that scribe. Nicely done   .

Jeremy

[Thadbow]

Great job Brad, I like it!

[Bill Kissner]

[Bill Kissner]

[Bill Kissner]

Dang it Brad, I'm jealous of your ability to build stuff! I thought you were just a boring accountant!        Very nice work AGAIN my friend!

[Bill Kissner]

[Bill Kissner]

[Bill Kissner]

[Bill Kissner]

I have no idea how I ended up with so many posts!

[bjansen]

Thanks Gents!