< <





INFO: Trad Archery for Bowhunters



Cord Wrapped handles.

Started by Chester Thompson, July 12, 2009, 11:03:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Chester Thompson

What do you use to seal them to keep blood and gut from getting in them and stinking?
Ask me about CTO.

kbaknife

When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

OconeeDan

Seriously Karl?  I always thought you wash it and when it gets nasty just rewrap with new cord?
Dan

kbaknife

I've never done one, Dan, but at a hammer-in I went to last year a fellow who makes a lot of tactical ear wraps his handles, tapes up the blade to protect it, and then mixes some West System epoxy. Paints it on to soak in and then lets it set up for a day.
Repeat until it no longer takes any more.
Would I lie to you?
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Chester Thompson

Well I am going to try the epoxy and see how that works thanks.
Ask me about CTO.

tippit

I just wash mine in hot water and dish detergent.  Then after a week of bear camp, I'll cut off cord and re-wrap.  Once you get the hang of wrapping a cord handle, it takes less than 10 minutes to do...tippit
TGMM Family of the Bow
VP of Consumption MK,LLC

Chester Thompson

Well after saying I was going to epoxy it I ended up with a dab of superglue and I will see what it ends up like after a few hogs. Like was said I can just cut it off and redo it later.

Thanks,
Chester
Ask me about CTO.

tippit

I don't think you can really waterproof cord...but epoxy or super glue might make it last a little longer...that is smell a little less longer  :)   But the beauty of it is how great the grip is and how easy & quick you can add a new wrap.

Now, I drill all my blades for paracord & pins so I can try them first with paracord to see if they are worthy of a nice permanent handle...Doc
TGMM Family of the Bow
VP of Consumption MK,LLC

OconeeDan

No, Karl, I don't think you would lie to me about knives.  Now on other matters....I know you would pull a leg from time to time, you like to laugh too much.
Dan

kbaknife

Here's the knife that got the Epoxy treatment.
It also had ray skin underlay:
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

tippit

Karl, I'd like to know if that really seals out odor.  That one is a fair amount of work to think about cutting off!  Mine are the simple Slam Bam Thank You Mam quickies so no big deal or any tears in cutting off  :)   They sure get stinky after a week of skinn' bears...Doc
TGMM Family of the Bow
VP of Consumption MK,LLC

kbaknife

I'll bet they do.
I have no personal experience with long term exposure to guts and such.
When it comes down to it, being able to replace it sounds like a pretty good idea.
Try the epoxy once and find out!
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Chester Thompson

If I was doing some thing fancy like ray skin under it I would think about trying to seal it, but under current conditions I will just cut if off if it gets to bad.

That is a very beautiful knife.
Ask me about CTO.

BowHuntingFool

I tell ya, you guys sure a good at what you do. I am very impressed! I just wish you would all post more pictures.   :goldtooth:
>>>---Joe Bzura---->

Big River Longbow 66" 52# @ 28"
Big River Longbow 66" 47# @ 28"
Big River Longbow 62" 52# @ 28"
Big River Recurve 60" 48# @ 28"
NewWood Longbow 58" 45# @ 28"

Wisconsin Traditional Archers
     Ojibwa Bowhunters

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©