4 knives done

[JMR]

These are four knives that I made as X-mas presents. Blades are made of 01 and the handles are ebony with brass pins. I just wanted to show them to everyone. Comments and criticism welcome. Thanks, Jason  

Jason, You need to down size your picture to 640 pix wide and re-post them.  Thanks...tippit

[Steve Nuckels]

Very Nice!

[Chris Surtees]

   

[Wampus]

Well, since you asked for criticism, straight on lighting rarely works out well for knife pictures.  If you have a couple of lamps you can light from two sides and turn off the flash, it will help keep the reflections down.  
If you really want to go super high-tech studio lighting, you can make a light tent out of an old white T-shirt and some kind of frame out of cardboard or small PVC pipe.  Lots of tutorials online about making DIY light tents.

Really like the knives though, very nice work!

[Mike Ostrowski]

I dont see the photos?

[JMR]

Sorry about the pics...I think I figured out the resize thing. Thanks for looking, Jason

[Kevin Evans]

Nice work Jason!!
How long have you been making knives???

[prarieboy]

Knives look real good. C-Ya Bob

[JMR]

Thanks guys for checking them out. Rooster these are my first real knives, I made one other knife but it didn't work out. I'm still learning but I'm hooked. I was thinking about doing the knife swap,  but I'm not sure my knives are good enough? Jason

[KHALVERSON]

jason
get in on the swap its a great thing
yes your knives are good enough

[JMR]

Thanks, that's all the nudging that I need to get in on the swap!!!

[LONGBOWKID]

All great lookin knives bro, you should be proud!

[skullworks]

Great job! The swap is awesome fun!