< <





INFO: Trad Archery for Bowhunters



Clicking noise on Bear limb

Started by trapper, January 13, 2013, 05:56:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

trapper

Anyone know how to stop a clicking noise coming from the latch area on the top limb of my Bear takedown?
Will McQueen

Orion

Limb is probably just a tad lose in the pocket. Two tiny felt pads about the diameter of a pencil eraser on each side of the top or bottom of the limb near the butt. Small rubber pads would also work. Or you might find some nylon drawer stop pads and cut them down to size.  You'll only need a sixteenth of an inch or so, maybe less.  For that matter, a couple thicknesses of duct tape might do it.  Good luck.

Oops.  Didn't see the other thread on this topic.

ahandle70

Try a little bit of string wax on it.  I had a newer Gainesville B riser that did the same thing and the wax solved it.

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©