Inserts or adaptersfo carbons?

Steve in Canton · February 17, 2007, 09:29:00 PM

Tring to use carbons for the first time out of my recurve. My bow is 57# @ 27 and I am going to be shooting either 145 gr snuffers or 135 grain magnus 2 blades, Would you recomend adding the inserts to the whole length of the arrow or getting the heavy adapters to add to the front of the arrow.

MikeC · February 17, 2007, 09:35:00 PM

Which carbons do you plan to use and what will you be hunting. I prefer a well placed flat shooting arrow and use the standard insert and either 100 or 125 grain heads. I have no problem achieving good weight or blowing through Whitetails.

I use GT Trads, Carbon Express CX and Beman MFX Classics.

Steve in Canton · February 17, 2007, 09:44:00 PM

GT trads

houseman · February 18, 2007, 07:15:00 AM

I'd put the 100gr. brass ad. in. That's almost my old setup.JMO

Golden Hawk · February 18, 2007, 07:40:00 AM

Get some 100 grain brass inserts and if you need more weight in front use 100 or 125 grain steel screw in adapters.

Wudstix · February 18, 2007, 10:08:00 PM

I shot Beman 400 ICS for experimental purposes only. 100 grain brass broadhead adapter and 190 grain Ribtek, with weedeater line inside the shaft(60 Grs.), 29". 670 total arrow weight. Lasers I tell ya'

Inserts or adaptersfo carbons?

Steve in Canton

MikeC

Steve in Canton

houseman

Golden Hawk

Wudstix