Hello Ladies and Gents,
I have the 225gr Hellfire 4 blade model and as the package said they are sharp but not shaving/hunting sharp. Im decent with knife sharpening on a stone but this broadhead doesn't allow me to get the right angle on the blades because the bleeders are so tall.
It isn't recommended to take them apart from what I've read. I can't find any info on youtube about how to go about it for these heads.
If you have any tips or have done these heads I would be very grateful for the help.
https://www.3riversarchery.com/steel-force-hellfire-4-blade-broadheads.html

I had the same question a couple months back. I just used one of steel forces broadhead wrench's and disassembled them. Sharpened using a stay sharp jig and then reassembled. Gotta be super careful putting them back together. I HIGHLY suggest using one of their wrenches and then a separate pair of pliers or broadhead wrench to hold the main blade. They do get wicked sharp though.

Yep, what Flbowhunter said.