Puting on some sealer coats of epoxy on another New Favorite. Going to a local guy. JF

[attachment=1,msg2970025]

[attachment=2,msg2970025]

[attachment=3,msg2970025]

[attachment=1,msg2970026]

A lot of cool stuff going on guy's

Fixed them for ya, Jeff.

Welcome to the Bench....

Thank you Roy they started off straight like they're supposed to I don't know what happened. I'll get it figured out someday soon. JF

Welcome...

Most of the sideways pictures comes from pictures from cell phones.

I use the Paint app in windows to rotate them, then save them, then post here.

Gluing up some Barkpocket Maple Osage, Maple and Myrtle. A New longbow for me.JF

Good job:)

Hopefully there will be a cool surprise when I get the shelf cut in. Lots of planning on this one. JF

 

Well I got my risers shaped up ready to go into a bow now I just put away for safekeeping for a while Make a pattern off this one for 68-in bow 18-in riser with this shape for me. JF

Little bit of extra weight ground copper super glued in to the deep pocket on the bottom of this riser. Not going to help a lot but what the heck. JF

Nice....

Out of the oven and cleaned up. Got the limb profile marked out, but gonna have to wait for rain to quit before profiling. I do most of my profiling with a flap disc on a 4" grinder outside.
[attachment=1]

I'm with you on that.I grind my riser shape with a 6-in disc grinder air outside. My old body man tool. Not afraid to use 24 grit either.That's what I start with. JF

Brad, is that green tape or green glass?

Green tape.
Cherry veneers under clear glass.

Cherry, maple and purple heart in the riser? JF

Looks great Brad.

Lookin good Jeff and Brad!