2021 what did you do today?

Started by Roy from Pa, January 01, 2021, 05:54:06 AM

Previous topic - Next topic

0 Members and 6 Guests are viewing this topic.

Mad Max

AVCase posted this from last years shoot
In contrast to the failure with the Field bow limbs, the footbow limbs I built this year turned out to be the best performing and most durable that I have made up to this point.  Of the arrows found, every cleanly shot arrow exceeded a mile. The biggest issue was finding the arrows.  At the Smith Creek dry lake, the longest drawn arrows disappeared into an area of hummocks covered with vegetation that we didn't realize was there. At the Bonneville Salt Flats, the longest drawn shots just couldn't be found.  I lost so many arrows. The longest verified shot was just over 1,986 yards plus 1-foot.
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Roy from Pa


Shredd


kennym

Now if we can get someone to dry fire one on slo mo....  :biglaugh:
Stay sharp, Kenny.

   https://www.kennysarchery.com/

mmattockx

I still find shooting an arrow well over a mile to be a mind boggling achievement. The arrows Alan uses for that are ~10" long, made with skinny solid carbon fibre shafts, use razor blades for fletching and have a machined stainless steel nock. They look much more like darts than arrows. The bow draws something like 250# and they use a big shelf to overdraw the arrow to somewhere over a 20" draw length.


Mark

Flem

Well thats definitely impressive, but can he hit anything with that set-up? What does the target they shoot at look like? :campfire:

[attachment=1]

B-JS

I got backpain today.
Had to string a 60" hybrid longbow with 105# without a Stringer.
10mm (0.4") Stack with 1,3mm (0.05") Glass.

Longcruise

I'd have trouble with that using a stringer.   :o
"Every man is the creature of the age in which he lives;  very few are able to raise themselves above the ideas of the time"     Voltaire

Buemaker


Mad Max

I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Roy from Pa

Man that could hurt:)

Converted my 4" metal bench vice over to a 6" x 3" wooden block vice padded with rubber....

Glued the riser on the bow today.

[attachment=1,msg2957363]

[attachment=2,msg2957363]

Mad Max

Where is the vice :dunno:

Lookin good roy
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Roy from Pa


kennym

Rody, you put jast a little more hook on there and she will be a Corvette !   :thumbsup: :thumbsup:
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Roy from Pa

Its gonna do 175 fps now wif a 10gpi arrah.

I had to slow them down cause the feathers were burning off b4 the arrow got to the target
and I was missing high...

And its a longbow not one of dem recurve thingahmajigs....

But I'll try more hook on next one just cause I wanna smoke the pants off ole Shreddys bows.

Plus this one is headed out west for a guy who never shot a stickbow, yet.

So he doesn't need the speed demon rody special,  yet...

mmattockx

Quote from: Longcruise on March 22, 2021, 04:08:17 PM
I'd have trouble with that using a stringer.   :o

+1, that is a stout bow.


Mark

Flem

I think that could be called a bionic crossbow :saywhat:

Roy from Pa

Here ya go Maxi..

[attachment=1]

[attachment=2]

Shredd

  175...  Thats faster than a lot of glass bows out there...  Just goes to show you what a good design can do...  Good job Royster... :thumbsup:  But she aint done yet...   :)

   If your gonna catch me you better be shootin that bow out of that corvette that Kenny mentioned doing a buck 20...  :laughing:

Mad Max

I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©