I am soon moving and building a new shop. My better half insist that I stop using the dumpster approach and get professional help. Who has pictures of a well thought out layout or work station/ bench that they are proud to show. Room is not the issue but better organization is what I am looking for. Please share your ideas.
Thanks

[attachment=1]
This doesn't have much to do with layout, but I found this flip cart to be a handy little work station. I store sanding belts and attachments in the drawer at the bottom.
Dave.

It wasn't quite finished when I took the picture. I've since closed off the ends of the mounting surface and attached cam clamps to lock it in place.
Dave.

Well, if you have a lot of space, the world is your oyster. If, like me and most of the shop pics I have seen on this forum (not including Bue's) you would be smart to put everything on wheels. I had a Fine Woodworking book on shops once. Had to get rid of it, got depressing looking at what I would never achieve.

That's the kind of thing I'm looking for David, Is that a belt sander mounted to the bottom. What about the mechanics of flipping the table. I hope to have 20' X 30' designated to my woodworking and would like to have it well organized. I do like the wheels.
Thanks

I got the idea from YouTube. The box where the tools are mounted is framed with 2x4s. Two for the edges and two across the middle that house a one inch black iron pipe. I used a 24" pipe that I cut in half and then screwed both halves into a tee. I ran a power cable through the pipe and out the tee into an outlet where I can plug in both machines. The pipe acts as the hinge and I modified the plan a bit by resting the pipe in a pair of slots in the plywood. Two oversized pipe flanges fit over the pipe ends to secure the assembly. I found a pair of big washers to act as shims on the inside of the plywood so the box swivels smoothly.
The best video I found was "building Fisher's flip cart".
I used cam locks to secure the top.  If you like I can take another picture of it now that it's done.
Dave.

I also built a couple of wood carts to keep my wood pile under control. Before, it was piled up against the wall and it would continually "grow " outwards and get in my way. 🤔
Dave.

Rolling stations are awesome if you don't have a lot of workspace plus I do all of my dirty work outside...  So I just roll my tools out there...

Wood carver, I got to give you the innovation of the year award for that one...   

I can't take the credit for those carts. I borrowed the ideas.
Dave.

Other pics would be great. Post or text to 601-600-1046

Thanks

Here is mine; I bought the 3 drawer cabinets from Lowe's and built perfect fit slots in my work bench to house them. I had a carpenter friend build the to drawers on each end over the storage compartments My bench is very heavy and won't walk across the floor when I am doing some heavy draw knifing. I have a post bolted the end of the bench next to the vise for stave/flintlock support for stuff I have in the vise. The post is very handy for stave straightening/untwisting.

The narrow table in the middle floor is a glue-up table for BBOs, very handy and a good place to store my 40+ C clamps.

Another thing; A dust collection system is a must, I have a 2HP Griz, it is so loud I put it in an adjacent room and ran my suction piping through the wall.

For years I kept my shop like this; I keep it close to the clean shop pic above now.

Thanks Eric , I do like the glue up table. My current shop had a built in kitchen with lots of cabinets but can't take them with me. I've got to plan out the dust collection. As I'm going to have a single room the noise will be a problem for sure.

Over the years I have added more and more shelves as well.

[attachment=1]
Here's another picture showing the cam locks.
[attachment=2]
[attachment=3]
Dave.

I also recently bought a set of heavy duty casters to mount on mu workbench. I need to be able to move it so I can clean in behind it.
Dave.

Some nice looking risers there, Dave.

My "shop"   has good days and bad days.

[attachment=1,msg2920447]

[attachment=2,msg2920447]

Mostly bad