Good stats there Shreddy  got my self bow floor tillered and reflex put in today Happy Thanks Giving to all !

[attachment=1][attachment=2]

That selfbow gets more and more intriguing.  Really curious how the reflex is going to play out.

Thanks Buddy...  Don't know much about that kind of bow but it looks good...  Cool to see how patient you are...

That yellar bow is lookin good.

Thanks guys well if you look at the profile most of the reflex is in the mid/outers I left the limbs full width in the lowers it's starting 5 1/4" should hold 2 1/2 with patients  of course it's exspermentle that's the most I have ever done on a non sinew bow but it's going to be 40-45 lb should work ! Shreddy every thing about these timber bows is time consuming !

Finished the mod form and cut some lams


Sent from my iPhone using Tapatalk

I think you will like that profile. If it is a bit crazy after the shot back your wedge up a bit and string groove back the same.  Seems to me if the reflex starts too soon off the wedge things get a little crazy..

Sent from my SM-T550 using Tapatalk

Thanks Mike, it's all an experiment. LOL

Bet that's going to be a peppy bow Kenny I like the profile 

  Kenny

Quote from: Forwardhandle on November 28, 2019, 12:26:25 PM
Good stats there Shreddy  got my self bow floor tillered and reflex put in today Happy Thanks Giving to all !

[attachment=1,msg2896987][attachment=2,msg2896987]

That almost looks similar to a board bow. Very nice workmanship!

Nice Kenny...  What is the radius mid-limb??

Quote from: Forwardhandle on November 28, 2019, 02:28:00 PM
Shreddy every thing about these timber bows is time consuming !

   Just keep remembering...  Its not about the destination...  Its about the path...  Just keep enjoying the process...   

 Thanks Kirk, well it's still just a peace of wood a little while to I call it a bow !

That's a lot of reflex, Ritchie..

Well I guess I could make another safe over built self bow that doesent break to hang on the wall  or have fun & try some thing new ! 

LOL
Go furit:)

[attachment=1,msg2897079]

Roy you got a flat spot under that Plumb bob

What Plumb bob?

on the left about 6" above the nock

That is a coiled up string attached to the on/off switch of the air cleaner.