125 gr helped greatly,may cut 1/4 inch off,I think that will do it for left/right.
started at 1/2 inch nock point,bareshaft hit low,went to 3/8,hit low,then 1/8,low again. Went the other way after 0 but still low bareshaft all the way to 7/8 inch,still low....... Any ideas why bare arrow would come off low on flipper rest 2 at all nock settings??? Or better off going back to leather rest and plate?  THANKS for the assist

Might help to have a little info on your bow setup and arrow choice.  That's a pretty vague question without knowing some particulars. You shoot split or 3 under?

Sent from my SM-G955U using Tapatalk

1916 arrows..20inches 125gr point split finger  bear kodiak hunter 1975 model