Heres a persimmonflatbow I got done a few weeks ago. I do t have the bow in hand so im going off memory for the dimensions. 4" handle, 2" fades, limbs are 28" from fade to nock and are parallel till midlimb tapering to 3/8" tips. The overlays and shelf are bacote. There is one coat of rubbed in linseed oil then about 10 coats of truoil. It took about an inch of set all said and done. It's a good solid shooter but nothing outstanding in performance. It was heat treated too.
The guy I built it for liked the look of 1.5" wide limbs and wanted it a bit overbuilt as he was afraid of it breaking on him. So I made the limbs a bit longer than I normally would have, to compensate for being slightly narrower than I would've liked to have done. But I won't complain about the results

https://i.imgur.com/LJyGar8.jpg
https://i.imgur.com/RaoKQVe.jpg
https://i.imgur.com/wiFQYP7.jpg
https://i.imgur.com/X3vYEOI.jpg
https://i.imgur.com/rMbhKjs.jpg
https://i.imgur.com/L0P76eX.jpg
https://i.imgur.com/NsmzKWL.jpg
https://i.imgur.com/3ej0CEN.jpg

Thanks for looking,
Kyle

Nice bow, Kyle and the tiller looks good.    

Nice bow! I like it.  
Any pics of the tips?  I'm always interested in seeing design of guys daring to go that narrow. I'm nervous at 1/2".

Very cool!  Love how you incorporated the knot.

Nice one !!!

another nice bow Kyle...

Thanks guys. Here's one of the tips. I'm having trouble getting the pics to upload to imgur. Probably just a signal isssue at the house. But it's atleast a back veiiw of te nock.
https://i.imgur.com/blYC6MZ.jpg

Kyle