Shop tools and rust.

David Flanrey · July 03, 2017, 05:19:00 PM

Hey bowyers, I just built a new shop and I have bought some new tools to go in it. What do you guys use to prevent rust on the unpainted areas? Like on band saw and table saw tops. Want to take as good care as I can. Let's hear some ideas.
Thanks,David

Roy from Pa · July 03, 2017, 06:06:00 PM

Wax them often with a piece of wax paper. Makes wood glide across them like on ice.

Bowjunkie · July 03, 2017, 06:22:00 PM

In addition to coating the work table surfaces, maintain a dry atmosphere with a dehumidifier... it's good for bow wood, other metal parts, and keeps mold and mildew away too.

Mad Max · July 03, 2017, 06:27:00 PM

QuoteOriginally posted by Bowjunkie:
In addition to coating the work table surfaces, maintain a dry atmosphere with a dehumidifier... it's good for bow wood, other metal parts, and keeps mold and mildew away too.

Mine run's 24/7

wood carver 2 · July 03, 2017, 08:43:00 PM

There is a spray on protection called Top Cote. It protects the iron or steel surfaces and won't contaminate wood. It also reduces friction.
Dave.

skeaterbait · July 03, 2017, 08:52:00 PM

I use Johnson's paste wax.

David Flanrey · July 03, 2017, 10:11:00 PM

All great advise. Didn't think about the humidifier. Will get one. Thanks guys!

Stocked up with a new 14" band saw, 10" table saw, edge sander, 8" jointer and a 13" planer all Grizzly and a Mikita 12" miter saw. Hoping to keep them in good working order.

bigbob2 · July 04, 2017, 01:08:00 AM

I am a little concerned the wax might pollute the wood and interfere with glue ups? Just guessing though.

Roy from Pa · July 04, 2017, 08:25:00 AM

Ya need to buy the wax free wax..

Bowjunkie · July 04, 2017, 09:02:00 AM

Bostik GlideCote is what you want. It seals tool tables and blades from rust, reduces friction, doesn't build up, and won't affect glue joints or wood finishes like oils or waxes.

July 04, 2017, 09:28:00 AM

QuoteOriginally posted by Roy from Pa:
Ya need to buy the wax free wax..

Roy... Where can you get that stuff?? Is it in the 'board stretcher' aisle??

Wolftrail · July 04, 2017, 11:36:00 AM

I'm inclined to use W-40 or equivalent it penetrates the micro pores in the metal and it has rust inhibitors, wax wont do that. I used wax on my patio door it lasts about a month spray lubes triple that time.

macbow · July 04, 2017, 02:53:00 PM

I use the Jhonson's paste wax.
Rub in wipe off not enough left to contaminate wood.

David Flanrey · July 04, 2017, 07:59:00 PM

Ordered some Glidecote. Ill get a dehumidifier which will help keep my wood dry also. Glad I turned to the Gang for help. Thanks

M60gunner · July 06, 2017, 12:58:00 AM

Years ago in San Diego I was looking around the house for something to use on a couple hand saws. Ended up using sunflower oil from wife's kitchen. Tried Olive oil as well but it stinks after awhile.
WD-40 and such products can leave residues which your glue or finishes may not adhere to.

breazyears · July 06, 2017, 08:09:00 PM

car wax

Eric Krewson · July 07, 2017, 09:45:00 AM

If I notice a little rust on my equipment tables tops I give the area a light sanding with 400 grit and put a little oil on the table. I might have to touch things up about once every 5 years.

eflanders · July 12, 2017, 08:14:00 PM

Johnsons paste wax. Make sure whatever version you get that it doesn't contain silicone. Silicone will negatively affect your finished pieces. WD40 IS NOT good to use as it dries out (W stands for water and D stands for dispersion). WD40 also contains silicone.

bamboo · July 21, 2017, 08:56:00 PM

http://www.rockler.com/zerust-no-rust-table-saw-cover

this one caught my eye--
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwiZpdWD15vVAhUCbz4KHRUaBugQFggiMAA&url=http%3A%2F%2Fwww.toolclad.com%2F&usg=AFQjCNHB8ltm97V8 bxIAy3__J8-MBDAB1A

David Flanrey · July 25, 2017, 01:07:00 PM

Mike, I like your idea!!

I did buy a dehumidifier for my shop and treated the tools with Top Cote.

I should be completely moved in a couple more weeks. Time to build some bows

Thanks for all the posts!! I'll post some pics soon. Have everything just sitting in shop right now.