Galen, it is 1.460(thanks Mark) at fades and 1/2" at tips, I may narrow it a bit more . I agree narrow and deep is quicker....

Yep, it has the superlam in it which includes a tip wedge and a power lam, both 11" from either end at .009 per inch taper but paralleled for a few inches to keep thickness down a bit. You can actually kind of see the end of the tip wedge end.....

QuoteOriginally posted by kennym:
and half a beaver on the string

Lol. That's like the big hair from the seventies. (Or so I've been told).

I figured Roy would chime in on that, bet he had big hair in the 70s

Get with it benbow, you have been over at that other place with your little dogie.
 

Roy don't have to worry none about big hair any more  

That speed will work fine in my book.

I think she will do a bit better when finished Mike. If she is quiet and shoots nice and easy, good nuff!!

Half a beaver is better than nuffin..  
Scrubby told me last month I needed a hair cut..

She did much better with the beaver stripped off. And the masking tape, and unnecessary unfinished tips adding weight

QuoteOriginally posted by kennym:
She did much better with the beaver stripped off.

I can't even go there!!!    

She did much better with the beaver stripped off.

OMG, so now your beaver is bald? Just asken...

Bald beavers, far out I like it.

QuoteOriginally posted by Buemaker:
Bald beavers, far out I like it.

   

Figured I'd get a rise out of you guys.  

QuoteOriginally posted by kennym:
She did much better with the beaver stripped off. And the masking tape, and unnecessary unfinished tips adding weight

I am not the visual type. I visualize alot different than most. I am a numbers type.  "Much better" is best described by numbers. So the magic fps number is?  Or is this statement based on just the shooting experience?

smokin

She averaged 191 at 28" with a 9 gpp arrow. May be better with an actual tuned arrow instead of just the right weight....

Will check it again when I get one tuned to it.

Now those are numbers a man can drool over....

That was on machine, fingers will be a few slower...

Good job bud!!!