QuoteOriginally posted by Roy from Pa:
 Bueboy, I bought that bow new in 1971.

:eek:  Daaaaang.............You are old!!  

QuoteOriginally posted by Bvas:
 

QuoteOriginally posted by Roy from Pa:
 Bueboy, I bought that bow new in 1971.

:eek:   Daaaaang.............You are old!!      [/b]

QuoteOriginally posted by Mad Max:
 

QuoteOriginally posted by Bvas:
 

QuoteOriginally posted by Roy from Pa:
 Bueboy, I bought that bow new in 1971.

:eek:    Daaaaang.............You are old!!       [/b]

[/b]

QuoteOriginally posted by Bvas:
 

QuoteOriginally posted by Roy from Pa:
 Bueboy, I bought that bow new in 1971.

:eek:   Daaaaang.............You are old!!      [/b]

QuoteOriginally posted by Mad Max:
 

QuoteOriginally posted by Bvas:
 

QuoteOriginally posted by Roy from Pa:
 Bueboy, I bought that bow new in 1971.

:eek:    Daaaaang.............You are old!!       [/b]

 [/b]

 

Your a good man
I don't care what Kenny said.

I glued on the belly overlays tonite. Changed up and used 6 pcs (I think), no pics cause I ended up putting bocote and maple lams on because it had an S curve in it. Not sure how it will look yet....

Probably like me , better with no pics...  :D

Booooooo!!!!
Even crappy pics are better than no pics    :D

I'll get ya some when I get home, hadda go to doc this morning for checkup.

Here is gluing the black glass to belly, you can kind of see the S curve in the overlay.



I was having probs getting solid blocks to fit right, so went with bocote and maple lams , I think it may look OK when handle is shaped . That black mark is 1.75" from the back of bow, that is grip depth, and will be 1" wide side to side...

Also narrowed the limbs to .460 at fades and a fuzz over 1/2" at nocks. Can go a little more as I check tiller....

1.460

Yep LOL, miss one once in awhile!  

Here we go on shaping, marked out the grip and shelf...



I reckon you can guess what's coming now....



Another view of marking it out...



Here she is off the table saw, found a dry glue joint with a little crack, overfilled it with CA. ..   :cool:

 

Off to the big sander for a few, still got a ways to go...







Down to this, still gotta round it over on limbs, I can get it to 50 easy...

And the one everybody wants to see...

I think the one everybody wants to see is the chrono reading when that arrow is turned loose.    
That riser turned out completely different than what I had pictured.
Really liking those bends. Looking I'm guessing it has about 8" tip wedges???

Well, I shot it thru the chrono, but it didn't mean much with an untuned arrow and half a beaver on the string....

Showed 184 fps at 28" with 9gpp arrow. Figured it should be better than that...

Had a 58" doing 190 a couple weeks back.

Looking good
You Da Man

Kenny what is the limb width at the fades and tips? I've found narrow limbs like 1 to 1 1/16" wide at the fades and 7/16" or less at the tips seems to bring the speed up. Also did you add any tip wedges. It has a nice full draw profile but could use a bit more residual reflex