Bow building can be hard on a body..

Started by Roy from Pa, September 30, 2016, 10:56:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Dale Hajas

"So long as the new moon returns in Heaven a bent, beautiful bow,
so long will the fascination of archery keep hold the hearts of men"

Roy from Pa

OMG....
Just used the dust deputy for the first time. I am Impressed! I washed out the shop vac, installed a new paper filter, and connected the deputy hose up to my 4' edge sander and prepped a pair of core lams and a piece of boo.
I turned on the shop vac and it sounded like a tornado at the end of the edge sander where the hose connects. Did the lams and boo while watching the dust swirling into the dust deputy container. Then I removed the top from the shop vac, And it still looked like I never used it.
Absolutely Amazing...
Before when I used the edge sander with shop vac only, the shop would be dusty as heck. I highly recommend getting the dust deputy. My setup was about $110.00, a good investment in my opinion.
Thanks again Pago... ^5 brother..

Pago

The best made plan won't get it made the way you planned.

Roy from Pa

After you told me about the dust deputy, I did a search on you tube on it. I kept thinking B.S. But there were so many videos with the same clean results in the shop vac, that I had to see for myself.
It works great.

Mad Max

At my father shop they have the same looking collector but much bigger, like 20 foot tall outside with a dumpster under it.
I did'n know they made one that small.
Nice.
How big is your shop Roy?
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Pago

QuoteOriginally posted by Roy from Pa:
After you told me about the dust deputy, I did a search on you tube on it. I kept thinking B.S. But there were so many videos with the same clean results in the shop vac, that I had to see for myself.
It works great.
I had the same experience, Oneida air is a reputable company I became convinced their science type stuff backed up the claims and took a chance too.  It's a little hard to believe one cyclone works that much better than others but I do know there is a lot of science involved, I'm happy with my purchase and glad to recommend it to others.
The best made plan won't get it made the way you planned.

EwokArcher

I have a big blower I kick on with my shop door open and use a respirator on top of that. I have a 12x16 shop so it gets dusty fast. I am constantly stopping to blow it out with the leaf blower on top of that. I guess real dust management could make a big difference

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©