Pretty sure this has been up before but lets review. How much air pressure for you guys that use the hose method and why. I think Elmont sez 70 psi which is what I use. So far so good for me.

65 psi for me. No problems here.....yet!

Mike,
 I try not to go more than 40/45 psi
I really try to keep an eye on my fade areas and make sure they are nice and tight and then give it a few more psi for safe measures.  
Try to give your next bow a dry run and see how many psi it takes to close up all your gaps...I guess it would depend on design?
Let us know what you come up with...
 

70 here

55/60

55-60

55

I have gone from 7o to 6o

I pull off the bike air pump at 70 so it is probably around 60-65

I've gone to 70 when necessary due to higher curvature with thicker lams. But once everything heats up, the pressure climbs another 10 on me. Never had a problem. I like 50-60 if everything clamps up nicely at a lower pressure.

David, I always wondered how much heat added, but never checked.