QuoteOriginally posted by fujimo:
what are the dimensions of that bow-
length when strung
length of statics
and angle of statics.

i found that the one i built was really stacking the last 2 inches of draw for my draw length- i am going to have to build a slightly longer bow now for my DL.

The string is 58" so close to that , the static's are 7-3/4" to the nock I wanted 8.
Un strung the angle is 12 degrees past vertical toward the grip.
The reflex is from the nock's to the back of the riser 8-3/4" 10-1/2" to the grip

The sheepeater bow should draw to 30"
what's your draw?

I don't like the hose on the back of the bow but I could not figure the riser with power lam.

This is the blank riser NO lams
I'am changing the riser, the belly stack is going threw the riser, then 1/4" stack of glass and wood plus more wood for the grip and sight window
It's like a take down riser and the limb butt wedges out past the riser. I think it will work

cool!!!

thats how i did my riser- did it first on a kenny m- and really liked it- and did it on the recurve too.- makes the layup quite easy- except for the extra work feathering in the stack on top of the glass- but its worth it i think.

wha's the chrony say mate??

rain rain rain rain

   

i would be putting up a piece of ply 4" thick at the end of the hallway, and shootin' it inside   :eek:    

Ya skeered your gonna melt or sompen?  

Mucho interesting.      Bue--.

Did some shooting today
28# @ 28" 186 fps average, 289 grain arrow


also shot my 25# T/D static recurve at 182 fps average

The 2-1/2" more reflex did not do much, a lot more unstable