Hello all,I have posted a few questions as a newbie and I a still trying to navigate around. Is there anyone who can answer a questin in regards to tip overlay?

Sure, go ahead and ask.

ah sucess! I was wondering if I was in the rigt place. I am following 4est older build along and I cant seem to locate in the post what he suggested t do with the tip overlay after it has been cut. Can you help?

I have glued on the tips and cut them using the template that he was so gracious to make available but the post stated that the bottom would be cut later on using a different template. After a long search (I probably missed it)I cant seem to find what to do.I am in the process of completing my first bow, but am stalled.

I cut the tip of the limb off at an angle, two inches in from the tip of the limb. Then I make up my tip over lays how ever I am going to make them. The picture here has two layers, the black is buffalo horn and the wood on top is spalted maple. Your tip over lay can be one piece instead of two like I show here. I make the overlays 2 inches long also, I sand the end going toward the bow to a paper thin edge. I use smooth on glue to attach them. I wrap them with plastic wrap and wrap a bunch of gum bands around the glue up to hold it in place.

 

 

Are you familiar with 4est trekkers pyramid bow build along sir?

Are you asking about cutting in the string grooves?

I have read through it.

Are you asking how to cut in the string grooves on the belly of the bow, to match the grooves you already have cut on the side of the limb tips?

I think I amm missing something for sure(like how to navigate in the forum) at any rate, I have glued on the tip overlay and cut it. Is there another overlay that issupposed to go on top of that? Thanks for your patience.

Can you take pictures and post them here?

I guess what I am asking is do I strt to work what I have done into the final shape, and if so is there a bottom cut that I need a template for in order to do this

No there doesn't need to be another overlay over top of it, I just made mine thinner and used two pieces.

taking pics at this point is beyond my current skill set (lol)

on page one of "So you want to build a pyramid bow" it shows the recurve tip overlay and then it goes on to show the recurve template and then the cut. I have made the cut and that is where I am stopped

If they are glued on and dry, you can cut them into shape now. I suggest searching you tube, there are many videos which could help you. Here is just an example.. However this bow video does not have overlays but the shaping process will be the same.

https://www.youtube.com/watch?v=JhVKBiZ6u5w

I apologize for not being able to send pics and I appreciae any and all assistance.

awesome pictures by the way.

No need to apologize, I understand. Just relax and you will get through this.

https://www.youtube.com/watch?v=jY911kAHU1Q

Like I mentioned above, search you tube and you may find the info you need.