Grizzly 6x80" Pattern Sander Conversion

tenbrook · January 05, 2013, 07:15:00 PM

Thought I would post some pictures now that its all finished up.

tenbrook · January 05, 2013, 07:16:00 PM

Roy from Pa · January 05, 2013, 08:27:00 PM

Very nice, Cody

Dmaxshawn · January 05, 2013, 09:23:00 PM

Slickness Cody

rmorris · January 06, 2013, 12:11:00 AM

Nice! Your awesome bows are about to get a killer upgrade!

Crooked Stic · January 06, 2013, 12:51:00 AM

That setup should work fine for you. Now you just need to make some jigs--more fun --
I have a thread going right now for that.

bjansen · January 09, 2013, 06:44:00 AM

Nice retrofit for your dust collection. I will have to try that.

Dmaxshawn · January 09, 2013, 04:46:00 PM

Good work Cody. Ima have to try that on mine.

Robertfishes · June 28, 2013, 10:27:00 AM

I bought a used G1140 sander.. I want to add this type of pattern sander to it. I also like the BJansen version. Tenbrook Have you changed anything in this design or did you "get it right" the first time?? I have been using a Robosander with a tungsten carbide sanding sleeve for the last 3 or 4 years, which has worked well but the belt sander will be a lot faster.