Main Menu

First Bow - 62" Hybrid

Started by CardboardDuck, May 27, 2012, 08:55:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

CardboardDuck

I am almost finished with my first bow. It is 62" #50 at 27". Please let me know if I am on the right track... Bo-tuff and hard maple with a coreflex laminated riser.


IMG_0375


IMG_0374


IMG_0377

and the money shot... (my daughters bedroom is pink...)


IMG_0378

wood carver 2

Very nice! If you didn't say it was your first, I would never had guessed.
Dave.
" Vegetarian" another word for bad hunter.

wood carver 2

" Vegetarian" another word for bad hunter.

SportHunter

Looks great Nick, welcome to TG.

Trux Turning

:clapper:   you are on the right track- nice looking bow!!

Emack100

hay Dave?? do you live in or near berks county pa because i want to learn how to make a bow and i need someone to teach me i will be able to clean up and tidy for you in return of showing me how to make it

CardboardDuck

Thanks guys. I tried to find someone in my area to learn from but I couldn't, so I just decided to jump right in... I have to admit some parts of the process are a little confusing, I'm still trying to figure out exactly how to make my arrow shelf... any tips would be appreciated.

After I make a few of these I might attempt something a little more difficult.

BMN

Compton Traditional Bowhunters
Professional Bowhunters Society
Prairie Traditional Archers
TGMM Family of the Bow

The most frightening thing you are likely to encounter in nature is yourself.

scottm


jess stuart

Lood good!!  Full draw pic is very nice, looks like it will be a great shooter.

JJB

Welcome, you're doing a great job!  I cut my arrow shelf in with a bandsaw then round it out with a dremel tool or rasp.
-Jay

CardboardDuck






This is what I did today for the shelf. I think I need to round it out a little more...

Trux Turning

You've got a lot of meat left on the riser. I'd cut it in closer (deeper) to center. Your shelf radius is looking good.

kennym

Welcome!!

I'm with Dave on centercut, will make arrow tuning much easier..


And great job on 1st bow!  :thumbsup:    :thumbsup:
Stay sharp, Kenny.

   https://www.kennysarchery.com/

CardboardDuck

How much more should I cut?

Trux Turning

You could cut it in closer to center at the shelf-start your cut higher up and taper in to the center- I did most of this one with a belt sander and then files- you can also cut out most of the material with a band saw or even a hack saw--this will give you an idea...
 

CardboardDuck

I took it in a little further...



It's about 1/2" in now.

CardboardDuck

Bow Shooting  

Here are the first three arrows shot by my first bow... I haven't shot a bow in about 15 years so if my form is bad that is why  :)

jsweka

>>>---->TGMM<----<<<<

Trux Turning

Great job!! Looks like it shoots well too.

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©