phenolic Tip sanding

bigcountry · February 28, 2010, 06:01:00 PM

Guys, I am trying to repair some overlays on some recurve limbs. I bought some brown phenolic and black. After trimming and presanding the tapers, the brown looks white.

What is the procedure you go thru to smooth it out nice?

ranger 3 · February 28, 2010, 06:20:00 PM

Sounds like it needs to be buffed out with maybe some 000 steel wool. Maybe someone with more experience will chime in.

Robertfishes · February 28, 2010, 10:50:00 PM

when you spray finish on the phenolic it shoild darken.. I know black phenolic does, sand down a scrap piece and wipe some finish on it and see if it darkens

B M A · March 01, 2010, 01:03:00 AM

Just take some acetone on a rag and wipe the tips it will give you the general idea of how it will look with finish.
Red phenolic does the same thing but when finished the red comes out.

bigcountry · March 01, 2010, 11:29:00 AM

Thanks guys, I guess I am confused how folks get phenolic nice and bright and smooth. I think the white is the linen. I want to sand them some before gluing on.

Robertfishes · March 01, 2010, 01:11:00 PM

I read somewhere you can take a black magic marker and mark over the black phenolic..havnt done it myself,but it was from a good source.

Kanga · March 01, 2010, 02:29:00 PM

Mark.

I usually sand the Phenolic starting with 100 grit then work my way up to 320 grit, I have found doing this makes it real smooth, as for the color that should come out when you put the finish on.

bigcountry · March 01, 2010, 06:26:00 PM

QuoteOriginally posted by Kanga:
Mark.

I usually sand the Phenolic starting with 100 grit then work my way up to 320 grit, I have found doing this makes it real smooth, as for the color that should come out when you put the finish on.

Thanks Russ, was going to give you a ring tonight on the matter.

razorsharptokill · March 01, 2010, 08:25:00 PM

You can buff it to with a cloth wheel and some jewelers rouge on a grinder.