I'm getting ready to glue on some dall sheep tip overlays on my BBO.  I have some Superglue gel and some other high strength clear epoxy (some walmart stuff).  Which should I use? Or should I order some Urac?

I've used all 3 and they have all worked fine. I have recently started using 5 min. 2 ton epoxy from walmart. But like i said all of it will work i just prefer the epoxy now. Hope this helps!

Adam

Thanks, Adam.  Does the epoxy sand well?

The times i have used it it has. I usually wipe off all the extra as soon as i clamp it just to keep from having to sand so much.

Any of those glues will work for overlays. I use gel super glue mostly.

super glue has held for me when others havent.

I use CA and Locktite SuperAttak, Precision, for all my bows. Warbows @130# to childrens bow @10#... And never had failure!

I use regular superglue.

Nick

I have always used Loctite superglue gel in the blue squeeze bottle for adding horn overlays. No failures. Here I am installing horn tips on the St. Judes bow from 06.
 build-a-long

Thanks guys.  I'm going to use the Loctite Superglue gel in the blue bottle.  I'll post up some pics tomorrow.

As a precaution and to remove any existing oils, I always soak any animal headgear in acetone before installing.

bigjim

I like gel superglue with the accelerator. Can start sanding in short order!

Glue them on, go have a sammich, then go to work on them. That Loctite gel will be done by then.

p.s. a razor blade makes a good scraper when smoothing and blending horn tips.