Wood for Handles

Willrett · March 17, 2009, 09:31:00 PM

I have a knife and axe combo that I am redoing the handles for.

http://i728.photobucket.com/albums/ww290/Willrett/Combo3.jpg

I'm wanting to do something darker maybe a dark red. My questions is I'm kinda limited to shopping places (Lowes or 84 Lumber are close no saw mills) I'm looking at 6in L * 2in W for each.

razorsharptokill · March 18, 2009, 02:58:00 AM

Oak or hickory then dye it to your liking.

Caveman IL · March 18, 2009, 04:30:00 AM

Some cocobola would be nice. Regrettably, not to be found at Lowe's or H Depot. Maybe someone has some scaps for a swap. It doesn't grow around here-- too bad. Good luck. Larry

OconeeDan · March 18, 2009, 05:02:00 AM

You are on the internet, you have lots of wood available. Check out the auction sites for small quantities, or Bingham Projects.
Or Griffin Exotic Woods.

Lin Rhea · March 18, 2009, 06:40:00 AM

Is there a woodcarver's association around? They always have scraps. Some of my best exotics come from them. Lin

skullworks · March 18, 2009, 07:02:00 AM

Get in touch with some cabinet or furniture makers in your area. They usually have a ton of small scrap left over!

Willrett · March 18, 2009, 07:53:00 AM

Thanks for the info guys I will check into your suggestions.

razorsharptokill · March 19, 2009, 09:09:00 AM

KennyM (Tradgang) has small pc's.

kbaknife · March 19, 2009, 09:16:00 AM

I recently got a bunch of hickory from a cabinet maker's shop.
Had a dumpster full of it!
Especially look for the knotty and figured material that does not shape easily and they hate to run through their planers and such.
One man's trash = another man's gold.