< <





INFO: Trad Archery for Bowhunters



Bear Archery - That's all is says....

Started by Terry Green, March 19, 2010, 09:23:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Terry Green

Any info on this one?  A customer broght it to me to find out more about it.

Thanks for any help on date made, model name, woods used, what's the screw for?, the two other holes?.....

   

     

   

   

   
Tradbowhunting Video Store - https://digitalstore.tradgang.com/

Tradgang Bowhunting Merchandise - https://tradgang.creator-spring.com/?

Tradgang DVD - https://www.tradgang.com/tgstore/index.html

"It's important,  when going after a goal, to never lose sight of the integrity of the journey" - Andy Garcia

'An anchor point is not a destination, its  an evolution to conclusion'

Terry Green

Tradbowhunting Video Store - https://digitalstore.tradgang.com/

Tradgang Bowhunting Merchandise - https://tradgang.creator-spring.com/?

Tradgang DVD - https://www.tradgang.com/tgstore/index.html

"It's important,  when going after a goal, to never lose sight of the integrity of the journey" - Andy Garcia

'An anchor point is not a destination, its  an evolution to conclusion'

d. ward


Danny Rowan

Terry,

That looks a bunch like a Grumly Bear but I am no expert. Woven fiberglass on the back. The screw is for a Bear bow quiver and the two holes are also from the quiver, it has a couple of Points on it that fit in the holes. Bow was probably made in the 40's-50's. It does not look like the quivers made in the late 50's an on, it was the first bow quiver Bear made and rather bulky. Could be a old Grizzly model also.

Danny
"When shooting instinctivly,it matters not which eye is dominant"

Jay Kidwell and Glenn St. Charles

TGMM Family Of The Bow
NRA Life/Patron member
NAHC life member
Retired CPO US Navy 1972-1993
Retired USCBP Supervisory Officer 1999-2017

shaft slinger

The screw is for a bear quiver and the two small holes are made by two "dimples " on the quiver bracket to keep the quiver from moving around,
    All i know  Harold
   Opps i was a little late with that post

PAPALAPIN

I agree that it looks like a GRUMLY.  However, Nels Grumly usually signed all the bows he made.  Either "Nels Grumly", or "Bear Archery by Grumly".

That doesn't mean this is not one.  It could be one that he did not sign, or the signature could have worn off.  Other Bear Bowyers also made bows semilar to this.

In any case, it is a highly collectible bow, but moreso if it is a Grumly.
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.

Roddo

I have a bow that is pretty much identical except it has the j hook takedown feature. I showed the bow to Fred  and he said that he had made the bow in 1946. He said "I made that bow in 1946 and its a good one." Based on that this should be an early Deerslayer. They were Hickory and Fortisan backed,Yew center,Osage face. 60 dollars in 46. Takedown feature,10.00 extra. Anyway you have a real gem.

Blackhawk

I agree with Jack that it is most likely not a Grumley (but I'm not Wade Phillips either   :thumbsup:
Lon Scott

Rick Enos

I have one just like it.They say if it dont say by Grummly...Its not a Grummly..Nels may have had a hand in making it but probabily didn't make it from start to finish...Still a gorgeous Deer slayer....

reddogge

Terry,
Nels Grumley parted ways with Bear in 1948 and his bows were all wood.  Bear continued to build all wood bows in 1948 and 1949 but after 1949 Bear introduced fiberglass backing to the bows.  It looks like your bow has fiberglass backing so I'd say it was built after 1949 and not by Grumley.
Traditional Bowhunters of Maryland
Heart of Maryland Bowhunters
NRA
Mayberry Archers

seboomook

We can whittle down the age and model pretty close from the pics. With the longer brush nocks, it's either a Deerslayer (62") or Hunter (66") Both were standard with hickory and fortisan backing, yew center and osage lace(This pic looks like the shorter deerslayer to me)
 Fred patented the scabbard type quiver in '46, so assuming the screw and bushing are original, and running bear decals started in '48, We are narrowed to that time frame. Remember too, the Grayling move from Detroit in '47, with mass production and Nels leaving soon after and replaced by Bob Meeker.
 The fact its laminated and not a self bow also suggest late Detroit, early Grayling.
 Other bowyers worked for Fred, and marked the bows exactly as above but they usually worked on the lower end models like the Field, Rover and Ranger.
 Anyway, she's a beauty in great shape. Maybe Wade will come along and find more clues.

d. ward


johnnyrazorhead

The bow is a deerslayer model and most likely made in the late 1940's.Sometimes called a "transition bow" as it was most likely made around the time Nels Grumley left Bear Archery in 1948 and when Fred started to mass produce his bows.I have a similar bow in a "Hunter" model,no tip build ups,with Bear Archery written in black on the belly,woven glass and the small running bear logo on the back of the upper limb.From what I've been told,if Nels didn't make the bow from start to finish,he didn't sign it.

JavelinaHink

A TRUE FRIEND ALWAYS THINKS YOU ARE A GOOD EGG EVEN IF YOU ARE SLIGHTLY CRACKED.

d. ward


Cody Roiter

Guys, That some what looks like the 1948-49 Hunter...

Terry how long is the bow ??..

>>>-------->

Cody
We as archer's must keep it alive by helping others into the sport WE LOVE.

4runr

Kenny

Christ died to save me, this I read
and in my heart I find a need
of Him to be my Savior
         By Aaron Shuste

TGMM Family of the Bow

Terry Green

Thanks for the replies guys....I'll pass it along to him.  Much appreciated.
Tradbowhunting Video Store - https://digitalstore.tradgang.com/

Tradgang Bowhunting Merchandise - https://tradgang.creator-spring.com/?

Tradgang DVD - https://www.tradgang.com/tgstore/index.html

"It's important,  when going after a goal, to never lose sight of the integrity of the journey" - Andy Garcia

'An anchor point is not a destination, its  an evolution to conclusion'

jcar315

So good to see some familiar faces on this thread!

Thanks for chiming in guys. Always look forward to learning.
Proud Dad to two awesome Kids and a very passionate pig hunter.

Right handed but left eye dominant.

Proud to be a Native TEXAN!!!!!

"TGMM  Family of the Bow"

Shaun


Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©