< <





INFO: Trad Archery for Bowhunters



Kodiak Super Mag 48" brace ????

Started by Cinghiale, March 12, 2009, 09:10:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Cinghiale

Hi guys,
I received a few hours ago a beatifull Kodiak Super Mag 48" 50 # the serial number is : KX17659
Can I know wich is the correct brace height ? I ask you because the bowstring thst the bow came with ( I don't know if it's original ) even if without any twist give me a brace of 9 1/2 inches and more....Maybe it's normal with a so short bow but I'm not sure.
Wich would be the correct bowstring lenght and brace height ??
Thnk for your help.

Army
Skype : guastini1964

In memory of my old hunting partner Silberio : VIVA MARIA !

Henry Hammer

That brace height is probably about right. If I remember they do have a big brace height. The string should be four inches shorter than your bow so you would need a 44 inch string. There are guys that know way more than me on here so if I am wrong help him out.
"No man's opinion is any better than his background, his experience and his general common sense." Jack O' Connor

Chalkdust

Hi Army,
My Super Mag shoots well at 8 1/2-9".  Some of the other guys might know if 9 1/2" is too much.
Mark

trapperDave

My Pearson Ambusher (same size bow) prefers about 8 1/2

PAPALAPIN

I think 9-1/2" is about right, although some guys may lowere it in tuning to their style.  I lost my Bear CD so I can't check the published brace height.

Some one witht the CD or original catalog needs to verify it
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.

brickchoper

Used to shoot a super mag when I was a kid. It does have a higher brace height. I think 9 1/2" sounds about right to me. But like noted you can do some fine tuning. And see what works best for you. Jim

Cinghiale

The problem is the bow came with a endless string ( I don't know if it is the original ) and also with no twist the brace cannot be lowered. The bow is with FASCORE do you think it can manage dacron B50 only ?? Aniway how much strands I have to build with and how long ??
Many thanks

Army
Skype : guastini1964

In memory of my old hunting partner Silberio : VIVA MARIA !

seboomook

Just checked the catalog CD, for '70-'71.
It gives no specific brace height, but states total length of 45 inches tip to tip when strung.
Should be a good starting point.
I would think a Raineman flemish string would give you plenty of adjustment.

artifaker1

9 1/4 is the published starting point. They may shoot better even higher. The bow will throb a little if you shoot it at a lower brace height than 9 1/4. I've had a equalizer as well and it was like that too. I couldn't believe how much better my "76" super mag shot braced to 9 3/8 or so. it went from a strong throb to dead in the hand. And I'm pretty sure it is faster there too. I draw it to 29 or more.
Love is fleeting; stone tools are forever

Cinghiale

Probably this is not the section where make the questions, but here, I know, there are many old bow user pretty well informed.
WHich arrow speed can I expect to get with this 50#  35 years old guy, using a 29" 2016 and 125 grains 2 blades broadhead ?
I'm thinking to bring my bow for a night hog hunting at not more then 10 yards distance...

Army
Skype : guastini1964

In memory of my old hunting partner Silberio : VIVA MARIA !

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©