Hey guys need some help. trying to refinish my dads old super k. Had alot of finish cracks in her.I had to sand it all down with 220. got all the finish off but had to sand the top limb a little more than I wanted to. Lost the super k logal in the process. Do they make a decal replacement? also have an issue with top limb glass overlay side. The glass has small short vertical lines witch look like fibers. Its not cracks. I think because I had to sand it down more than it probably should have been is there any way to  recoat the glass? Or to just fill in voids with color. and how bad will this effect the tiller? Want to try and make her a reborn shooter. Any imput will be much appreciated. Thanks Jim

Well right now no one has any decals for those models.We have a few TG members working on them but not much luck as yet...would it be possible for you to load a couple pics short lines look like fibers ? if you hand sanded enough to change the tiller that is a lot of hand sanding maybe even like 1-2 days of hand sanding to remove enough fiberglass to change the bows tiller ? the super K silk screen would have been on top of two layers of finish also ?? pics..bd

Super kodiak that I'm trying to refinish. Was my dads old hunting bow. The bows been sanded all down with 220 grit.Coin had to be cleaned up.Removed and shined it up. The big problem is the top overlay side. overlay got whipped out due to finish cracking. also veiw the other post pictures, showing the short line issue. Again any input or ideas how to help. Wil be apreciated.Thanks Jim What year is this bow? I guessed 69 or 70.

Futurwood and no stabilizer bushing. Probably a 1970 bow.

-Simon

Yea that sounds right to me the serial numbers KY1271B. Think that I read somwhere that K was 70's number.Thanx Novaln