3Rivers Archery




The Trad Gang Digital Market














Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters




RIGHT HAND BOWS CLASSIFIEDS

LEFT HAND BOWS CLASSIFIEDS

TRAD GANG CLASSIFIEDS ACCESS


Main Menu

Short arrows,

Started by Mr.Chuck, January 26, 2007, 12:45:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Mr.Chuck

Does anyone out there shoot a 27 inch arrows, and know how to make them heavy weights?  Woods and Aluminums?  Any help will be appreciated.

Mike Orton

TGMM Family of the Bow

Hot Hap

How heavy are you looking for?

tecum-tha

My arrows are 27",too!
There are two possibilities:
Change to a heavy wood like ash or maple( I prefer maple seems to stay straight after sealing);
If you change to heavy woods, please look for quality: My tapered maples are almost indestructable, but straightness of the shaft before sealing is important and straightening must be done using heat. Remember that you will probably have to change your spine number, since maples have a slower dynamic recovery rate. That will usually mean you`ll need heavier spine.
I think it is worth to try Arrow Art for maple arrows. I got a real nice and straight dozen from them!
For aluminums: remove insert and stuff the shaft with a polypropylen rope you can get at a home improvement store in the correct diameters;
adds about 100gr and will not affect spine.

Mr.Chuck

Hot Hap,  in the 6 to 7 hundred grain weight.

**DONOTDELETE**

I have ash arrows that are in that range that are 27" w/160grn points....

Hot Hap


Shawn Leonard

Ya can get a cedar darn close to 600 with that 27" arrow, just ask for some heavy weights from the supplier. I shoot a 28" arrow and get my cedars after dipping and sealing up to 600 with 125 grain head. Shawn
Shawn

paradocs

Yep, what Shawn said.  My cedars are 26.5", and go 630 gr with a 200 gr head.  Larry at Lost Nation made them up; I just requested a weight for him to hit.  Took a little longer, but worth the wait.

Pat Handley

I am somewhat vertically challenged myself and shoot a 27" arrow.  For heavyweights I use laminated maple from Dinks Feather Shop (www.dinksfeathershop.com) or laminated birch from Alleghenny (www.arrowwoods.com).  Both of them you can even get tapered.  And being laminated, they stay strait real well.  The maple will be over 720 depending on your finish and point, the birch will be about 620. They make exellent arrows for hog hunting.  I'll not go after hogs with a lighter shaft.

Mr.Chuck

Thank guys.   Been a great help!   This is a great place to be!   :-)

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©