3Rivers Archery




The Trad Gang Digital Market














Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters




RIGHT HAND BOWS CLASSIFIEDS

LEFT HAND BOWS CLASSIFIEDS

TRAD GANG CLASSIFIEDS ACCESS


Main Menu

Carbon arrows for a 35# longbow

Started by vermontrad, July 09, 2007, 09:22:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

vermontrad

What do you think? I use 29" arrows. Anyone know what carbons might work? I hear they don't like the light bows much.???
"Only a fool lean upon his own misunderstanding" -B.Marley

Toxophilite

Take a look at Shawn Leonard's thread on this page about CE Thunderstorm SE carbon arrows...
They might be just the ticket.
I'm only as good as my first shot.

Bow Nut

I would suggest Blackhawk Vapor Carbonwood 2000 series. They look like wood arrows and are a little hard to find but they are the only carbons I've found that work well out of lighter bows ( 25 - 45# ). Make sure they are the 2000 series. With 5" helical fletch and 145 grain field points with the factory inserts they fly great from my daughters 30# longbow at her 25" draw with 27" BOP to nock groove. You might have to reduce point weight if you have a longer draw and you might have to raise your knocking point a little if you don't cant very much. I saw them advertised on Custom King's website about 2 years ago and ordered them through my local archery shop. If I remember right they were about 84 bucks for a dozen. They are quality carbon shafts. I've been told that Gold Tip also makes a light traditional looking shaft but I've never seen any. Hope this helps.
We cast our best shadow when we stand in the light of 'The Son'

hawk22

Easton ST Epic 600's. They shoot very well out of my girlfriend's 39# and 35# bows.

Bowchef

Doug

dachba

Dave from North Bend, Oregon

vermonster13

Any of the 600s should do the trick for you if carbon is where you want to go.
TGMM Family of the Bow
For hunting to have a future, we must invest ourselves in future hunters.

olderndirt

You might want to look at Beeman Energy.  They are available in 600, 690, and 780 spine.  They are the same shaft as Easton Redline with a lower straightness tolerance, which makes them far more economical.
I'm not lost ... I'm exploring alternative destinations

eagle24

QuoteOriginally posted by Bowchef:
GT Entrada 600
No question Entrada 600's will shoot.  I shot them from my 41# ACS-CX (29" draw) and have a good friend who was shooting them from a 35# long curve and now shoots them from a 31# Turkey Creek LB (he draws 25").  We were both shooting them full length.

I also think you could shoot full length Carbon Express Maxima 150's.

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©