3Rivers Archery




The Trad Gang Digital Market














Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters




RIGHT HAND BOWS CLASSIFIEDS

LEFT HAND BOWS CLASSIFIEDS

TRAD GANG CLASSIFIEDS ACCESS


Main Menu

question about RIT dye and feathers

Started by bbassi, June 21, 2007, 06:21:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

bbassi

For those of you that dye your own with RIT, do you add anything to the dye like they suggest? also, how long do you let them sit in the dye? I'm experimenting.  :)
Cum catapultae proscriptae erunt tum soli proscripti catapultas habebunt.

Tom Leemans

I use denatured alcohol instead of water and don't get it too diluted. They'll be some grit at the bottom but don't worry about that. Another thing I've done is dye them one color, then splatter them with a similar, darker color. I made some "retro" tie dye feathers that way.
Got wood? - Tom

Keith Deters

I use regular food coloring.  I add a spoonful of vinegar just like coloring Easter eggs.

oldgriz

Two things to remember when dying feathers... watch the heat and always add vinegar...
I have dyed more than my share of feathers when I tied trout flies commercially... and heat will curl a feather in a heart beat...
Tom Mullane
Bear Grayling Mag TD 60" 50#
Bear Grayling Mag TD 64" 37#
Wing Chaparell 60" 48#
Tom Cole Old Timer LB 68# 54#

bbassi

does the vinegar help to set the color? The ones I did yesterday look good but I'm afraid they will bleed if they get wet.
Cum catapultae proscriptae erunt tum soli proscripti catapultas habebunt.

Dave Worden

I've dyed a couple of sets of feathers and used water and vinegar.  They came out just fine EXCEPT some of them curled badly. Thanks to oldgriz, now I know why.  I did dye them after chopping to minimize the chances for splatter when taking them out of the dye.
"If I was afraid of a challenge, I'd put sights on my bow!"

VTer

I just add the dye to warm tap water in a clean glass mayonaise jar and shake well before adding feathers. Color determines how long you soak them. I've never had the color run with this method.
Schafer Silvertip 66#-"In memory", Green Mountain Longbow 60#, Hill Country Harvest Master TD 59#

"Some of the world's greatest feats were accomplished by people not smart enough to know they were impossible."
   - Doug Lawson.

fireman_3311

I probably get mine too hot, but it works!!! Chop first, mix the RIT and water in a sauce pan...about 50-50...put the feathers in, heat until it steams good, but not yet boiling, and set off the burner!!! I let em cool enough to touch, then rinse some with the faucet sprayer, and lay on paper towels to dry...
Official Measurer for Boone and Crockett, Pope and Young, Compton's, Longhunters, and both Mo books.  Have tape, will travel!!!

**DONOTDELETE**

I heat the water Dye and vinegar bath to about Bath temp, if you like a really hot bath. I get good results but the colors are not terribly bright.  But it works okay.

TXRED

Have you checked out Herb Haines' thread on dying feathers & shafts in the 'How To' section?Haven't tried it myself yet,but I'm gonna.
John
   Too young for Medicare,
   Too old for women to care

pseman

I've tried the RIT and used similar methods as mentioned above. My results were fair with the colors not too bright. I have also tried dying with Kool-Aid and liked the colors much better. The Kool-Aid is cheap, easy to use, and comes in a wide variety of bright colors/flavors.
Mark Thornton

It doesn't matter how or what you shoot, as long as you hit your target.

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2025 ~ Trad Gang.com ©