leather??

[adam]

Hey guys,
    I'm wanting to make a backquiver out of leather, but i don't want any real heavy leather. I kind of won't it to lay on my back. i was wondering what oz leather to use and where to get it from?? Thanks for any info!

[Dano]

Check out this site.
http://www.brettunsvillage.com/leather/sides.htm  
I would use something between 4 and 5 oz.

[mike g]

Adam....
I use 5/6 oz. leather and I get it from
Siegel of California  www.siegelofca.com  
I use the Rough Rider leather a good Oil based leather....

[adam]

anyone else?

[Matthew D]

5 to 6 oz is good and any of the ones listed are good and Tandy is having a sale on their leather this month..  http://www.tandyleather.com/index.asp

[Shell]

Ditto to these gents'...
These have to be the best sources for leather and can find some good deals as well on ebay.

For a single time project ebay or a local Tandy may be a good start, but then once you do......you may be hooked and finding yourself searching the bulk rate stores like Mike and Dano posted!                  
It's intoxicating, and you're never the same after...        !

There are different tempers for different leathers so it may differ depending on which type of leather you like to use or go with.
You want somewhere between 5-8 oz...again depending on the specific tanned type. 5-7 oil tanned bison hide is my favorite to use in a medium temper. but if using vegi tanned or latigo cowhide, 4-6 oz. It is durable and yet plyable for comforming to your back.
Can't add much more to what has already been said. These guys know what they're talking about.

[adam]

Thanks for all the help guys!! I'll post pics when i finish the backquiver!!